id 701121691709

Название	:
Продолжительность	:
Пользователь	:	id 701121691709
Дата публикации	:	ript src=
Просмотры	:	layer\/0af6e327\/www-embed-player.vflset\/www-embed-player.js
Понравилось	:	1,158
Не понравилось	:	66

Thank you so much
Комментарий от : @fishingrayvlogs

Please use correct terminology. Jacks are what plugs plug into. The mixer panel contains jacks. Cables with the appropriate plugs go into them.
Комментарий от : @James_Bowie

Instead of using your phones to an input, why don't you use aux/fx send to return? This would allow you to run send to fx pedals or a compressor if you want and back to return in stereo or mono. Just curious. Send and return is what I like in a mixer and I was looking at this one on reverb for like $150.
Комментарий от : @jordanWAH

Are you 59 now😂😂😂
Комментарий от : @energyrush348

Wouldn't it be great if he would show where the speaker cables plug into the unit?
Комментарий от : @kathygerulaitis

I can’t hear the affects through my sony headphone while I’m recording! Is that normal or do I have to do something?
Комментарий от : @mohammedaboobayda8018

Thank you so much for that Video =) I recently got myself the XENYX 1204 for Twitch Streaming too, but I guess i´m running in some Issues, when I Plugin a XLR to 3.5mm TSR for my Music Line or Voice Chat Line the sound is a little bit more strange, less depths and struggeling with bass and kind of crackling sound, I tried plugging a ground loop isolator between but that didn´t work, may you have an advice =)
Комментарий от : @nrave9244

Hi Chris,I have bought xenyx x1204b usb newly.Could you please tell me why the green indicator near to tap button is blinking?
Thank you
Комментарий от : @jobyjoseph1984

You keep saying that you send a signal OUT of channel 4 to your Skype Machine. That is incorrect. Channel 4 is an INPUT channel. Nothing goes out that way! What you mean is that by turning the aux-knob on the respective channel, you send the signal to the aux SEND, which goes to your Skype Machine.
Комментарий от : @morgenkanalen9335

Thanks TNT for sharing this tutorial for us dummies,..this video is explained in simple terms and i was keen on buying other console mixers but alot of them don't have one knob compressor knobs and if they did the mixer console would have knobs, not fader channels.. and they were'nt selling it at the price of this mixer here... the 1204fx console has a pack load of features at a affordable price..
Комментарий от : @henryvaiotu230

it is not the usb one thanks
Комментарий от : @chrisboyd7015

what is the best setting for singing thanks
Комментарий от : @chrisboyd7015

Just one word.

EXCELLENT.
Комментарий от : @jaynic7116

can you sent to indonesua l need the mixer
Комментарий от : @herulazizah4645

I have a mixer behringer qx1002usb, can i use a headphones with 250 ohm, or is it better to use a headphones whit 80 ohm???
Комментарий от : @vecchiuz2143

What an amazing intro!
Комментарий от : @Diegosees

This may be the best instructional video I've ever watched. I went from being totally overwhelmed to quite confident in just 30 minutes.
Комментарий от : @johnpike4586

i have this same mixer, but my vu level light don't light up. Is there a secret I'm missing?
Комментарий от : @acceptablenorm5465

Very interesting and clear told. I have one question. Do you use the phantom power for your XLR mic channels? If you do, how does dit effect the input on channel 4 comming from de headphone output of your laptop?
Комментарий от : @marcod3080

Loved all the info in-depth and everything else. Thanks so much - love the passion !!

Paulo
Комментарий от : @TheAtticradio

Where do you connect the auxiliary jack to?
Комментарий от : @CedricJamesLucas

You know how I can make the connection of the mixer with the sam broadcaster for live radio
Комментарий от : @comunidadfolkperu

The effects on mine isnt working. I wanted echo but when i change it it wont work
Комментарий от : @yelasolcare8841

Greetings, if someone can help me: So I am using Macbook Pro Early 2015, with OS Cataline 10.15.7 - latest at the moment, and I am having trouble getting signal that can be seen inside System preferences -> Sound -> Input, as seen in the video, even when I select that USB port from my XENYX X1204USB. I know that there is signal coming through my XENYX X1204USB mixer, because condenser mic that is connected can be heard through speakers also connected to the mixer, along with fader showing the signal input level, but there is no signal coming to Mac through mixer's USB port. The port is working fine, because I can play music from Mac through mixer, to speakers, just fine. Please help. :) I am trying to get the signal inside Ableton, but there is no signal even coming to Mac that can be seen or heard.
Комментарий от : @zunicc

I realize this video is now 6 years old but I would like to add some advice- if you have this board with the "FX" ability, do not ignore it! By rolling up the second knob from the bottom (labeled FX), you can add a little delay/reverb, which adds a little perceived space to the sound- which should not be overlooked. With a little delay/reverb in the mix, it seems less like someone is talking directly into your ear, thereby making the listener feel a little less creeped out.
But if you like to project what some feel is a cozy/close sound then disregard my suggestion.
Комментарий от : @5speed735i

Hello Chris, this is DJ Scribbles, I just bought the Zoom H6 and the Yamaha MG10XU Mixer. Can U PLEASE show how to connect the Zoom H6 to the Yamaha (Channel 1). Which cable or what type of cable should I be using. I also have a DJ Mixer (Numark 5000FX) and I don't know how to connect it to the Yamaha Mixer. Which Outlet on the back of the Numark 5000FX should I be using to connect to the Yamaha.? Can I use Channel 2 of the Yamaha for the Numark. I have not seen one video on YouTube on how to setup a DJ Mixer to the Yamaha MG10XU Mixer or to any Analog Mixer. I Truly would Appreciate Your Help Sir...

DJ Scribbles
djscribbles63@gmail.com
Комментарий от : @bkson5440

OMG Keep your shitting Mouth shut if U cant explain like a normal human being ; Jabbering Shit !
Комментарий от : @tyjay5974

i have to much bass in my voice , just curious on how to lower that with a mixer
Комментарий от : @tjayypodcast8566

Thanks for the great info!
Комментарий от : @feraszeidan

Please how can I set it up with processor and equalizer and how to recieve live call with it please
Комментарий от : @las-beat7637

Great video. Didn't see how to set the led mic levels. Other than that you nailed it.
Комментарий от : @michaelslawinski1821

What mixer model is this?
Комментарий от : @alexm20112012

1204 has two independent aux sends/returns, does this mean I can put a compressor in the aux 1 bus and a reverb in aux 2 bus, and choose to send any channel through one or both fx? With an FX send level for 1 and 2?
Комментарий от : @girlinagale

sir may i ask you why my mixer behringer 1204usb when i play it always dead automatically. it always like that 1 menit it turn off automatically
what is the problem with my mixer
the STR and capacitor are already changed but just the same
i need your help. from indonesia north Sulawesi city manado.
thank you🙏
Комментарий от : @RHGPEACE

Can I connect 1 amplifier to aux send of a mixer
Комментарий от : @arnelramirez1383

OMG Jabber jabber jabbering , just keep your Gap shut and explain what you want to explain ;
Комментарий от : @tyjay5974

How to clear extra sound ?
Комментарий от : @ephraimbope9875

So the mixer is like another audio card added via usb cable? & does it replace the voice metter totally? if so that"s a greate device.
Комментарий от : @ArchangelKid

Why do you need a USB mixer if you can do recordings with just a USB microphone? Im confused. Can a USB microphone be used if your mixing board isnt USB
Комментарий от : @WallStreet749

I am using the usb on my 1204 usb fix mixer. Problem is the main slider volume is very loud at almost off position so I can’t use my microphones at that slider level
Комментарий от : @Detgadgett

Hi very informative can you show more about your imac hook up
Комментарий от : @onehundredpercent6134

The video starts 5.5 minutes in.
Edit your rambling down, please.
Комментарий от : @ryanellis4474

Do u have another mic plugged in on your mixer on channel 4 in order to hear your other casters? Currently working on how to talk with my teammates in game because they can hear me on discord but not in game chat. Help pls. Thank you.
Комментарий от : @NinjaCr0ft

Nice tutorial, very helpful. My problem is I only have Macs. Macs only have 1 audio interface, 1/8" in and out. How do I do mix minus with only 1 interface? The skype laptop will input into one of the channels (e.g., 1/8" to 1/4"), then there's no room for the aux back in to the laptop.
Комментарий от : @arlvirg

I have this same exact mixer and i cant get any sound out of my headphones. I've already hit the al 3-4 and turned up the volume but nothing seems to work. Help.
Комментарий от : @higher1k30

Hello, thank you for this video learned a lot. I have a question, I was planing on buying this mixer, my plan is to use it for techno music production inside ableton, so is this mixer good for it? Also can I do live act's with this mixer? Thank you :)
Комментарий от : @hmp01

hi, i have the same setup as you.
i copied all your inputs and the aux send
goes like this
1: my mic
4: notebook for skype
7/8: my pc
aux send 1: notebook line in
usb: to my pc recording

the thing that my hosy only hears my mic and no my computer music thats on 7/8 input, but i hear it in my phones
is there a possibility that aux send , only sends one signal?

TIA!
Комментарий от : @MetiendoMano

Can you show where the lines go when come out of the mixer. I have that same mixer and I’m having a hard time hooking everything’s up. My mic works got that down lol
Комментарий от : @HVACUncensored

Hello. Great video! I have a question, how can I connect my Behringer Xenyx 1204 USB mixer to my Behringer MDX 4600 gate/compressor? I'm open to suggestions... (for my podcast and it should include a mix minus also, but explained perfectly ). Thank you in advance for your answer.
Комментарий от : @ivanremus1

Control Room output for my booth monitor. For some reason if I use an effect on any channel, I cant here the effect through my Phones/Control Room Monitor output. I can hear everything except the effects. I could use the tape output but theres no control over the volume. Ive tried everything. Mono/Stereo plugs, Main mix button pressed others off and visa versa. Any help would be great. Thanks
Комментарий от : @djfishscottfisher108

OMG! The best manual on youtube . Thanks to you. Hi from Ukraine )
Комментарий от : @Soundman333

You are a good tutor and you explain excellent / Thanks
Комментарий от : @williamlipsett5772

Can you explain that auxiliary plug please? You only say you need it for the skype split, but you don't say where the other end of the cable goes to? Much appreciated, Jeff
Комментарий от : @jeff-smith

and then i take an output from the mixer to an another laptop in my broadcasting software to broadcast??
Комментарий от : @joobrazvishal7551

yes it a good explanation..but the mix minus output where did he go??back to the skype laptop??
Комментарий от : @joobrazvishal7551

GReat VIdeo, little confusing when you use , my Imac , the Skype machine and computer. I take it they are all one in the same machine. This is all new to me.
Комментарий от : @covenantchristianisraelite3069

what channel is ur video camera hooked up to
Комментарий от : @Gravy369

go to 5:40 to actually start
Комментарий от : @JaYGoasT

Hi There, i know its an old video but i got a question regarding the Phantom power. If i understood you correctly you used the headphone out of the skype machine (where the audio is comming out) to go into the XLR connector on Port 4. Your microphone is connected to XLR on port on. I would like to copy that set up( got the cord here), but i am stumped right now. My mic needs phantom power. Will the phantom power not "fry" the headphone jack on the laptop - as it is connected to an XLR port. Thanks in advance.
Комментарий от : @llyweiluntunare2232

Very, very clear & helpful - thanks a lot!
Комментарий от : @davidmorgan8699

Even though you use the FX it would have been nice to see how to use it. How to switch between presets and the like.
Thanks though I learned a lot of other stuff here.
Комментарий от : @sirCULTURE

would love to talk to you ..i just brought the same mixer...and have some questions
Комментарий от : @crosedesigns4u

Nicely done mate.
Комментарий от : @gaelicamericancraic1816

Hey, even when it's been a while since you made this tutorial I have found it so useful and I do thank you for all the info
Комментарий от : @robertorosales2022

Good tutorial. Thanks, very clear to me now.
Комментарий от : @kwamelion270

you have to physically "tap" the effects button to make a selection . i just found that out playing with my behringer . it says "tap" above the "program / parameter" dial . some of the effects make kind of "echo / reverb" noises . you ALSO use the "ORANGE" dials to send the effect to the main mix , i'm pretty sure .
Комментарий от : @created1983

Awesome video. It really helped clarify a few things for me. I did have a couple questions. First off on your Auxillary Output - what type of cable did you use? Is that a 1/4 mono to 3.5mm mono? Can you use the 2nd Auxillary Output to send to another source just like the 1st output is used? Thanks in advance! Great job!
Комментарий от : @wilburmcbeezy6299

You should do a tut on running a G+ , YT or live-stream ,/ hangouts / super-chat…. I see so many ppl having issues w/the audio & the screen sharing…. doing these I just got this one minus the FX's. I have a good interface that has inserts USB I got the mixer to do some looping petals & other instrument into a powered speaker for drums & bass loops on the out put of the Trio petal as well as the sDrum petal w/a guitar amp combo for stringed instruments. As well as a small set up for jams w/other musicians. But this gave me a whole other application for the mixer. Great job. I'd love to see any tuts on running the live streams like a Live Podcast I suppose w/the YT G+ interface it would be well received I believe & much needed. I'm on a mac. I was just thinking it might not be that hard to take that 1/4" input on Chn 1 & make it an insert jack. I have a buddy that is an audio gear guru he'd know if it could be done easily.
Комментарий от : @utubehound69

I know this is a 2 year old video.I have a ? For you doing our first on line live show very soon. Just got the same mixer . And just want to run 2 mic and run a cell phone to take live calls. Don't want to use Skype how do I hook it up
Комментарий от : @motorcycletalk1231

I have a question, I want to sent my mic and Skype to recording software, sent my mic to Skype (but not the music, YouTube etc. out of my PC) and want to sent Skype and my desktop audio to to headphones. The desktop audio is just for me so I don't want to sent my desktop audio to the main mix for recording or to my Skype callers. Is that possible and how is it possible?
Комментарий от : @rudyhovinga1971

How get echo in microphone????
Комментарий от : @kwstikas_kinstagram1595

i have a xenyx802 and it doesn't have the aux return so my callers hear themselves. not sure how to address this?? anyone have any suggestions?
Комментарий от : @shawandking

Hi,

Really helpful video, this has definitely helped clear up some questions I was having!

I've purchased a similar mixer for use for a 3 person podcast. I've seen headphone amps that enable all those involved during recording to hear themselves. Are these the only option? If so how do I connect it to the mixer? TIA
Комментарий от : @carlislebaker-jackson9554

HI WHAT TYPE OF MIC 🎤 ARE YOU USING AND HOW DO YOU GET IT TO WORK WITH THIS MIXER THANKS
Комментарий от : @calvinpringle2834

Hello I like your videos can you answer question for me what cables do I need for this mixer thank you very much
Комментарий от : @calvinpringle2834

Hi there mate - a very good video..very very informative. I was wondering if you can help me. I have the same mixer for 3 months now and I have connected my condenser mic (xlr) on channel 1, connected my monitors and the headphones to the mixer...I am using the usb cable to connect it to the laptop. What I am trying to do is to play a karaoke track on my laptop - which I should be able to hear in the studio headphones over my ears and then when I start singing (using the condenser mic) then I want my vocals to be recorded on a separate channel (not to be mixed with karaoke track) and I want to hear myself real time when singing/recording my vocals... is it even possible with this mixer or should I look for some other mixer that can do what I require
Комментарий от : @bobmarlow3953

Love that IKEA Dave stand. I've got the same one, with the same mixer on top of it!
Комментарий от : @argbargmcticktock

This is excellent. Clear and concise.
Комментарий от : @ronrogers2

If i have this mixer and a USB microphone where would I hook it up at to the mixer?
Комментарий от : @theUPTOPKID

Great video on this mixer. I was thinking about doing some youtube live videos for live music performance and some live question driven tutorials. This mixer seems like a good fit. I also shared this with a buddy who as a x1222usb and wants to do some podcasting. This should help him out a lot as well.
Комментарий от : @TheAudioDabbler

Hey. If I use the 800 Condenser Microphone does the Mixer provide the Phantom Power to it ?
Комментарий от : @EDeanCole

Excellent!
Комментарий от : @DavidBrown-xd8yc

TO HELP ALL WATCHING: AT 5:28 HE SAYS "LETS GET STARTED"...
Комментарий от : @Mickey1pmg

Awesome video! Thank you so much! However, i still have this doubt, i hope you can help me:

1.
I would like to have Channel 1 for my mic; and then have 2 separate channels to play music (let's call it deck A - that would be assigned to Channel 2 - and deck B - that would be assigned to Channel 3).
I don't have any CDJ, so my music is in my laptop, but I don't know if it's possible to assign via software, deck A (in Traktor, for example) to Channel 2 (in the mixer) and deck B (in Traktor too) to Channel 3 (in the mixer).

That would allow me to "simulate" live radio, using a channel to control one deck, and the other channel to control the other deck, while loading the music in the software!

Is it possible?

Thank you!
Комментарий от : @elisioaugustosousa

cool tiger!
Комментарий от : @pedrott6904

Thanks for the awesome video! Your setup looks great.
Комментарий от : @AlanRiplay

Just picked up this mixer and the cables I am currently using are causing some buzzing. What brand of cables do you recommend for both a 3.5 to XLR and a 1/4 inch to 3.5?
Комментарий от : @horseplay1846

How to adjust fx.
Комментарий от : @19395575

Question: I have this mixer and just found out I cannot do multitrack through the USB. What happens is once the USB is plugged all 3 mics record onto on single track. Is this becoming an issue when you have 3 people and you try to edit? It seems to use all mics independently only when the mixer is not plugged into my Mac. Also, do you use a Tascam recorder?
Комментарий от : @spedled9520

Hello mate, we are really struggling to get the desired level on our mixer, the first level of lights just about shows up! we have upped the gain slightly but wondered if there is anything simple that we are missing? Still very new to the podcasting world.
Комментарий от : @jamesmawditt

oh also im using the chanting in a new track, might as well make use of it eh?
Комментарий от : @curtisssaraiva2709

i have blue lights emitting from my ears when i press the phantom power button? also a high pitched female vioce chatting softly in a strange language? is this normal? please help!!
ps I just noticed the ear light thing this morning, just happened to have a mirror in the area,.. freaked me right out. help!
Комментарий от : @curtisssaraiva2709

How would I hook up/need additionally to make three usb rode podcaster
USB microphones work and which of the two mixers do you prefer for a
first time podcaster...?
Комментарий от : @theUPTOPKID

there is a grageband for windows version . audacity works accross all platforms.
Комментарий от : @allanegleston13

Great video, as a beginner I learned a lot from this.

I have a question. Say I connect two or three microphones to the mixer (co-host + guest) and we all have headphones connected. How do I make sure we don't hear our own voices? Can I use some sort of mix minus technique or do I need some completely different equipment for this? Thank you!
Комментарий от : @dennisa8866

What are all of the cables you will need for this mixer? Example: XLR cables, red-white cables, converters, ect?
Комментарий от : @SuperMercenary1

"Pay no attention to the effects" WTF,, dude you are missing out! you should learn how to add the reverb, and trust me you really need to use it. It will give you much more depth and professional finish.
Комментарий от : @beamerstrumpet

Информация о видео

Кадры из видео

Комментарии к видео

Похожие на видео